Impact crusher performance advantages – how to stand out among many mobile crushers?
July 3, 2023 Hawk
The impact crusher is mainly used for the crushing of building materials, metallurgy, chemical industry, hydropower, and other materials that often need to be relocated, especially for the crushing of mobile stones such as railways, highways, and hydropower projects. As soon as the counter-attack breaker was launched, it attracted the attention of users and was widely used. The reason why the impact crusher has a wide range of applications and is favored by customers is that the impact crusher has the following five performance advantages that cannot be ignored.
1. The impact crusher is suitable for a wide range of materials
On the one hand, the impact crusher can process hard materials with a compressive strength not exceeding 350 MPa. When the impact crusher is running, the blow bar is fixed on the rotor by the mechanical clamping structure, and it has larger rotational inertia as the rotor rotates. Compared with the hammer crusher, the rotor of the impact crusher has greater kinetic energy and can be crushed Harder material with less energy consumption.
On the other hand, impact crushers can handle materials with high water content. The feed chute and impact plate of the impact crusher can be equipped with a heating device. When processing materials with high water content, there is no need to equip the bottom sieve plate, and the material can be effectively prevented from sticking only by heating. It not only simplifies the equipment structure but also improves the crushing efficiency.
2. There are various ways to adjust the output particle size of the impact crusher
The impact crusher has obvious advantages in the adjustment of the output particle size. Compared with other crushers that adjust the discharge particle size by adjusting the size of the discharge port, the impact crusher can adjust the product particle size in three ways. First: Adjust the rotor speed or rotor diameter, increase the rotor speed, or increase the rotor diameter at the same speed, which can prolong the crushing time, thereby adjusting the product particle size, and can also increase the output and improve the material crushing efficiency. Second: Change the particle size of the product by adjusting the distributor. Adjusting the distributor and reducing the opening of the distributor can increase the overflow supply flow of the material, limit the collision movement of the material in the crushing chamber, shorten the residence time of the material particles in the crushing chamber, and improve the passing capacity of the crusher. Third: Adjust the gap of the grinding chamber to change the particle size of the finished product. The gap adjustment of the grinding chamber is mainly adjusted by mechanical or hydraulic type. The hydraulic type can quickly and conveniently operate the button or control system to complete the gap adjustment.
3. The wearable parts of the impact crusher have less wear and tear
The wear of the blow bar of the impact crusher only appears on the side facing the material. When the rotor speed is normal, the material will fall on the surface of the blow bar, and the back and side of the blow bar are not worn, even the side facing the material is less worn. And the bottom grinding rod is also easy to replace. The metal utilization rate of ultrafine mill board hammers can be as high as 45% – 48%.
4. The components of the impact crusher are easy to replace and easy to maintain
Only 6 blow bars are installed on the rotor of the impact crusher, and the blow bars can be replaced with the special tools provided by our company. It only takes one shift to replace a set of blow bars, and it only takes tens of minutes to replace the grinding rods. Therefore, the time for maintenance and replacement can be greatly reduced.
5. The impact crusher has complete specifications and various configuration methods
The series of impact crushers produced by our company has complete specifications and can be configured in a variety of ways according to the nature of the crushed materials, the scale of operation, and the requirements of finished products, so as to meet the needs of users to the greatest extent.
It is precise because of its unique performance advantages that impact crusher equipment has attracted much attention, and so many users have come to invest in it. If users choose impact crusher equipment, they can come to our company to visit and inspect it!